General

I suggest you ...

You've used all your votes and won't be able to post a new idea, but you can still search and comment on existing ideas.

There are two ways to get more votes:

  • When an admin closes an idea you've voted on, you'll get your votes back from that idea.
  • You can remove your votes from an open idea you support.
  • To see ideas you have already voted on, select the "My feedback" filter and select "My open ideas".
(thinking…)

Enter your idea and we'll search to see if someone has already suggested it.

If a similar idea already exists, you can support and comment on it.

If it doesn't exist, you can post your idea so others can support it.

Enter your idea and we'll search to see if someone has already suggested it.

  1. Wireless Capability.

    Hello,
    My name is Zackary Miller, and I only just recently found your product. I was absolutely ecstatic that something like this exists, because I've been doing home-made mods like your product for years. My last product was installing wiring into a JVC RX900, a headphone that has large cups, making it easy to work with. Your product very much negates having to do all that dirty work, and potentially harmful work, as I had to drill a hole into the headphone to make room for a jack. Essentially, you've done a wonderful job in making a product that lets…

    116 votes
    Vote
    Sign in
    Check!
    (thinking…)
    Reset
    or sign in with
    • facebook
    • google
      Password icon
      I agree to the terms of service
      Signed in as (Sign out)
      You have left! (?) (thinking…)

      2/4/17 ~update
      We’re getting closer on spec’ing this out. The nasty hurdle is likely to be making a USB receiver that works on PCs/macs/xbones/ps4s without driver issues or crappy software that needs to be managed … and still delivers unadulterated audio.
      Thanks for the feedback and suggestions, please keep them coming. I think we could kill it with a really well-done wireless solution but it’s not going to be simple or easy.

      J

      (initial old response) This is more or less “planned.” We would like to engineer a GOOD solution to this.
      The USB charger/driver seems likely. Magnetic/clasp charger-mic mating would be a cool feature, IMO. Would need to make this lightweight yet solid. We are starting down this road but cant commit anything yet as for dates etc.. Making it cheap enough yet with quality is the trick…

    • XLR XLR XLR

      3.5mm jack doesn't jive with xlr-based audio interfaces. We need an XLR option on this thing.

      69 votes
      Vote
      Sign in
      Check!
      (thinking…)
      Reset
      or sign in with
      • facebook
      • google
        Password icon
        I agree to the terms of service
        Signed in as (Sign out)
        You have left! (?) (thinking…)
        started  ·  6 comments  ·  Mic features  ·  Admin →
      • Make the mic wireless

        This would allow it to connect via USB / Blue tooth and when you are done with your gaming session you detach it from the headset and just rest it in the recharge case.

        Would sell a ton as mainly, bluetooth has a good enough frequency and then for the mic it eliminates the extra wire. Some people have the mic cable under a computer desk and the headphone jack on the speaker. all around easier time.

        39 votes
        Vote
        Sign in
        Check!
        (thinking…)
        Reset
        or sign in with
        • facebook
        • google
          Password icon
          I agree to the terms of service
          Signed in as (Sign out)
          You have left! (?) (thinking…)

          (pasted from other wireless suggestions) This is more or less “planned.” We would like to engineer a GOOD solution to this.
          The USB charger/driver seems likely. Magnetic/clasp charger-mic mating would be a cool feature, IMO. Would need to make this lightweight yet solid. We are starting down this road but cant commit anything yet as for dates etc.. Making it cheap enough yet with quality is the trick…

        • Braided cable

          make a version of the mod mic with nylon braided cables, it would greatly increase the quality in terms of looks and feel (if not the actual cable quality), also great match with other high end peripherals

          31 votes
          Vote
          Sign in
          Check!
          (thinking…)
          Reset
          or sign in with
          • facebook
          • google
            Password icon
            I agree to the terms of service
            Signed in as (Sign out)
            You have left! (?) (thinking…)
          • Wireless version

            A wireless version

            19 votes
            Vote
            Sign in
            Check!
            (thinking…)
            Reset
            or sign in with
            • facebook
            • google
              Password icon
              I agree to the terms of service
              Signed in as (Sign out)
              You have left! (?) (thinking…)
              1 comment  ·  Mic features  ·  Admin →
            • Detachable Cable + adapter cable

              The only issue with your attachable microphone is the added cable. Having two cables dangling off of your headphones is just messy and a pain in the behind!

              My Suggestion!
              First, make the cable detachable using a standard 3.5mm jack that will also carry stereo audio, left, right and mic like in most cell phones. (TRRS).
              Second, build and sell very short adapter cable for the most common headphone connections, 3.5mm, 2.5mm and mini XLR to connect the headphone to the microphone, and therefore only having to deal with one cable hanging off of the headphone/microphone.

              Sure this would only…

              14 votes
              Vote
              Sign in
              Check!
              (thinking…)
              Reset
              or sign in with
              • facebook
              • google
                Password icon
                I agree to the terms of service
                Signed in as (Sign out)
                You have left! (?) (thinking…)
                started  ·  1 comment  ·  Mic features  ·  Admin →
              • Broadcast quality / professional version

                I would really like to see a broadcast / professional grade version of Modmic in the future. Something like Sennheiser HMD 26-II, only in modmic form, not with the flat response headphones attached to it.

                It could come with a XLR-plug or with an in-line USB phantom power amp / connector.

                13 votes
                Vote
                Sign in
                Check!
                (thinking…)
                Reset
                or sign in with
                • facebook
                • google
                  Password icon
                  I agree to the terms of service
                  Signed in as (Sign out)
                  You have left! (?) (thinking…)
                  started  ·  0 comments  ·  Mic features  ·  Admin →
                • Offer more shipping options

                  We're using the least expensive ones right now. We could offer improved international shipping but it'll be around 37 USD O_o . Also FedEx and additional UPS options are available for domestic orders.

                  12 votes
                  Vote
                  Sign in
                  Check!
                  (thinking…)
                  Reset
                  or sign in with
                  • facebook
                  • google
                    Password icon
                    I agree to the terms of service
                    Signed in as (Sign out)
                    You have left! (?) (thinking…)
                  • either make the Modmic cable coiled like a phone line cable or detachable as many people have suggested before to make it more manageable.

                    I really like your product and the only gripe I have with it is the cable because it is too long for me so my suggestion for you is to either make the Modmic cable coiled like a phone line cable or detachable as many people have suggested before to make it more manageable.

                    11 votes
                    Vote
                    Sign in
                    Check!
                    (thinking…)
                    Reset
                    or sign in with
                    • facebook
                    • google
                      Password icon
                      I agree to the terms of service
                      Signed in as (Sign out)
                      You have left! (?) (thinking…)
                    • White microphone + clasp variation

                      Is it possible to make a white version of the mic and clasp?

                      9 votes
                      Vote
                      Sign in
                      Check!
                      (thinking…)
                      Reset
                      or sign in with
                      • facebook
                      • google
                        Password icon
                        I agree to the terms of service
                        Signed in as (Sign out)
                        You have left! (?) (thinking…)
                      • modmic cable management

                        Hello, i found a cheap solution in order to attach the modmic cable to the headphone it will be to get the same clips on this photo : http://geizhals.at/p/115709.jpg

                        I don't think it would be expensive and hard to add some clips to the modmic cable and could improve greatly the reputation of the product (it's the only cons that linustechtips raised about this product.)

                        personnaly it's the only thing that stop me to ditch my modmic 2.3 to a new modmic 4.0.
                        It's easy to clip the modmic cable to the headphone and it's as well easy to remove…

                        8 votes
                        Vote
                        Sign in
                        Check!
                        (thinking…)
                        Reset
                        or sign in with
                        • facebook
                        • google
                          Password icon
                          I agree to the terms of service
                          Signed in as (Sign out)
                          You have left! (?) (thinking…)
                        • Make a version available for headphones with removable wires.

                          There are some headphones that have female 3.5mm jacks in the cups that allow the end user to replace their wires, such as the Monster® Inspirations.

                          This provides an easy way you add in a microphone, while keeping both in the same wire, and it also allows for an easy way to us this as a headset with mobile device.

                          Image was made for reference: http://bit.ly/1xjcHIM

                          8 votes
                          Vote
                          Sign in
                          Check!
                          (thinking…)
                          Reset
                          or sign in with
                          • facebook
                          • google
                            Password icon
                            I agree to the terms of service
                            Signed in as (Sign out)
                            You have left! (?) (thinking…)
                          • Allow pre-orders or "notify me when available" functionality for v4

                            I am awaiting v4 but have to keep coming back to see how things are going, I don't mind doing that but I don't want to miss it when it becomes available.

                            8 votes
                            Vote
                            Sign in
                            Check!
                            (thinking…)
                            Reset
                            or sign in with
                            • facebook
                            • google
                              Password icon
                              I agree to the terms of service
                              Signed in as (Sign out)
                              You have left! (?) (thinking…)
                              1 comment  ·  Admin →
                            • Let people know it works perfectly with Xbox One

                              Someone may have already posted this but I use the Modmic 4.0 with my old Sennheiser HD555, a Fiio E11k amp, a Sennheiser audio splitter cable and the Xbox headset adaptor. It sounds great and all controls work as they should. You can do without the amp but I like the extra volume.
                              There are a few cables but I can still pick it up with one hand and wander around my house.
                              Thanks Antlion!

                              7 votes
                              Vote
                              Sign in
                              Check!
                              (thinking…)
                              Reset
                              or sign in with
                              • facebook
                              • google
                                Password icon
                                I agree to the terms of service
                                Signed in as (Sign out)
                                You have left! (?) (thinking…)
                              • Make Wireless

                                Hey, I love your product, it is great, but I think you should make the option to have a USB plug in so it is wireless. You could plug the USB into the computer then, just like a wireless mouse it would work without the wire!!!

                                7 votes
                                Vote
                                Sign in
                                Check!
                                (thinking…)
                                Reset
                                or sign in with
                                • facebook
                                • google
                                  Password icon
                                  I agree to the terms of service
                                  Signed in as (Sign out)
                                  You have left! (?) (thinking…)
                                • Whireless modmic

                                  Whireless please usb powerbank to modmic

                                  7 votes
                                  Vote
                                  Sign in
                                  Check!
                                  (thinking…)
                                  Reset
                                  or sign in with
                                  • facebook
                                  • google
                                    Password icon
                                    I agree to the terms of service
                                    Signed in as (Sign out)
                                    You have left! (?) (thinking…)
                                  • Make a one cable solution

                                    The two cable solution has been off putting to me, so i have a normal gaming headset. However, with all of these headphones with detachable cables, why not make the mod mic a pass through, so the sound passes through it it one cable to the end into 2 3.5mm jacks (or one 4 tab jack maybe) so that all the headphones with a detachable cable, only need one cable for the mic and audio.

                                    Headset>mod mic>one cable>2 3.5mm jacks

                                    7 votes
                                    Vote
                                    Sign in
                                    Check!
                                    (thinking…)
                                    Reset
                                    or sign in with
                                    • facebook
                                    • google
                                      Password icon
                                      I agree to the terms of service
                                      Signed in as (Sign out)
                                      You have left! (?) (thinking…)
                                    • 7 votes
                                      Vote
                                      Sign in
                                      Check!
                                      (thinking…)
                                      Reset
                                      or sign in with
                                      • facebook
                                      • google
                                        Password icon
                                        I agree to the terms of service
                                        Signed in as (Sign out)
                                        You have left! (?) (thinking…)
                                        1 comment  ·  Mic features  ·  Admin →
                                      • To add some international partners.

                                        You should add an international partner from Turkey. This would be good for all of us because you can beleive me , there are lots of people that they interested in streaming and gaming. On this way you will be getting much more money and there is not going to be any problem about purchasing. I didn't see anyone in Turkey who use modmic. But if we could buy this easily, trust me there is going to be lots of modmic users.

                                        5 votes
                                        Vote
                                        Sign in
                                        Check!
                                        (thinking…)
                                        Reset
                                        or sign in with
                                        • facebook
                                        • google
                                          Password icon
                                          I agree to the terms of service
                                          Signed in as (Sign out)
                                          You have left! (?) (thinking…)
                                          1 comment  ·  Mic features  ·  Admin →
                                        • Add more teeth to the clasp

                                          This would allow for a more forgiving installation and less bending of the boom to get the mic tip where you want it.
                                          (I'm pretty against this idea, I think the clasp is mechanically strong and that 90-degree increments remove the need to tweak the mic's placement on the clasp, e.g. with more teeth one may slap the mic on the clasp only to have it up by your nose/eyes when really need it down at your mouth)
                                          Removing a tooth from the clasp is also a decent idea to make the increments 120-degrees rather than 90.

                                          5 votes
                                          Vote
                                          Sign in
                                          Check!
                                          (thinking…)
                                          Reset
                                          or sign in with
                                          • facebook
                                          • google
                                            Password icon
                                            I agree to the terms of service
                                            Signed in as (Sign out)
                                            You have left! (?) (thinking…)
                                            1 comment  ·  Mic features  ·  Admin →
                                          ← Previous 1 3 4
                                          • Don't see your idea?

                                          General

                                          Feedback and Knowledge Base